Fittings
Crossvac is selling Vaculine and Plastiflex Fittings since the beginning because of their superior and advantageous quality at Central Vacuum Cleaner Fittings and Pipes.
the standard elbow for any central vacuum pipe installation. You will need at least some of those elbows.
Vacuum pipe 115cm for any central vacuum cleaner. This is 2 inch vacuum pipe which is considered industry standard for vacuum pipes.
Pipe strap for central vacuum pipes. Built to ASTM standard. It fits the 2 inch vacuum pipes.
This 45° elbow is a standard fitting from the basic 7 line. It can be considered to be installed in every central vacuum project.
The "standard" tee for any central vacuum piping system. If possible we recommend to use this tee.
Retraflex 90° elbow. Built especially to install a retraflex retractable hose system.
This 45° wye ist perfect for any needed connection to your vacuum pipe system.
This elbow 90° medium is perfect when there is not much space to install a regular 90-elbow. It has a best-as-can airflow. We definately recommend this elbow over the short 90° elbow that goes behind each regular inlet valve.
PVC Glue for central vacuum pipe systems.
The 45° elbow spigot is from the standard line of 7 which are the basic fittings you need most of the times for any central vacuum installation.
This 30° elbow is made for any central vacuum systems piping. It counts as a more specialised fitting.
Coupler inside for central vacuum pipe systems.
Ideal for connection from 3 directions, but the built-in tab also prevents dust accumulation when the airflow is cut off.
Pipe cap for central vacuum pipe. Built to ASTM Standard. To close an open string of vacuum pipes permanent or temporarily.
Retraflex 45° elbow for the installation of the retraflex piping system
This elbow is from the basic 7 line. Those are considered standard fittings youre going to need for every central vacuum installation.
Exhaust air flap for 2-inch (50.8 mm) exhaust air pipe 2-inch. The exhaust air flap is mounted on the outer facade of the house with screws so that the exhaust air pipe of the vacuum pipe system does not remain open.
This short tee ist perfect for a 3 way connection with your existing vacuum pipe system.
The exhaust flap is mounted on the outer facade of the house with screws so that the exhaust duct does not remain open. Dimensions: 15.5 cm x 15.5 cm x 3.8 cm (WxHxD).
Retraflex 22,5° elbow for the installation of the piping for the retractable hose system retraflex.
Coupler without stop inside perfect to fix a punctured vacuum pipe for example.
PROMASEAL®-A is a one-component acrylate-based fire protection compound. Due to its excellent processing properties, construction joints can be sealed quickly and safely. A color design of the construction joint is possible with any conventional emulsion paint. Constructions are tested, classified and approved according to the following standards: STANDARD EN 1366-3/4 STANDARD EN 13501-1/2 ETAG 026-2/3
Cable / wire for central vacuum cleaners.